192.168.1.1

control-panel

“DNS server is not responding” error message

On a computer that is running Windows, you receive the following error message:

“DNS server is not responding”

When this issue occurs, you cannot connect to Internet.

Method 1: Restart the router

Remove the power cord from the router. After all lights on the router have gone out, wait at least 20-30 seconds, and then reconnect the power cord to the router.

Local-are-connection-properties 2

Method 2: Configure the TCP/IP settings

Configure the TCP/IP settings. To do this, follow these steps:

  1. Click Start, and then click Control Panel.
  2. Click View network status and tasks under Networking and Internet.
  3. Click Change adapter settings.
  4. Right-click Local Area Connection, and then click Properties.
  5. Select Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
  6. Select Obtain an IPv6 address automatically, select Obtain DNS servers address automatically, and then click OK.
  7. Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
  8. Select Obtain an IP address automatically, select Obtain DNS servers address automatically, and then click OK.

 

To start with a few simple concepts to understand the issues. Address 192.168.1.1 – is nothing more than IP, which usually defaults can be assigned to certain types of devices, for example – the modem, router, router…. Enter this 192.168.1.1, as the name of any website in your browser, such as Firefox, Chrome or Opera, you can enter the settings of the device. New models of routers are configured through the Internet on sites tplinklogin.net (admin admin) and routerlogin.net.

If you have done everything correctly and the connection to the IP-address 192.168.1.1 is successful, you will see a window to enter the username and password, enter that – get full access to configuration. The standard login and password are usually admin / admin, administrator / administrator and other combinations, you can see more detail in the instructions for your specific model of router modem.

IP
If you can not go to www.192.168.1.1 and www.192.168.0.1 when configuring the router modem.An IP address can be defined as a numeric ID provided to any device in a computer network. This numeric ID is composed of four divisions of numerals, separated by dots. Private IP addresses range from 192.168.0.0 to 192.168.255.255.

Why Is It Called ‘Private’?

A private IP address won’t make your device identifiable outside your own network, which makes it non-routable.

What Is 192.168.1.1?

Let us use a simple example to explain the nature of this IP address. The computer you use in your office can have this IP address, and your home computer can also be given an identical address – and this won’t cause any problems. However, two network devices can’t use the same internet protocol address on the Internet; if that happens, network malfunctions will occur. Only one local network device (at a time) should use this IP address.

192.168.1.1 can be used repeatedly, and it can also be used by more than one user (if they are in different networks). One device in the network uses 192.168.1.1, but this IP address can also be used within some other network.

What should I do in this case?

  1. Make sure that the device is properly connected, that is, connected to the network (in this case should be lit LEDs on the device), network cable must be connected at one end to the modem, router or router at the other end to a PC or laptop. This is required in the primary setting. (Sometimes it is enough to connect Wi-Fi, but it’s better to err, and to connect a power cord.) If everything is connected properly, the housing should be lit light bulb Power and LAN. If these LEDs do not burn – it means your modem or router broken!

Another good think about 192.168.1.1 is that it makes the router management easier and facilitates the information flow. 192.168.1.1 also serves as a gateway.

Although this IP address was first created to be used by specific router brands, other manufacturers started using it. Today, it is used as the default for modems and broadband worldwide. However, if you want to use some other private IP address, you can change the default settings. Some users choose not to use 192.168.1.1 because it is pretty accessible (this can be a good thing for some users, whereas others see this as a big disadvantage – depending on what you want to use it for).

How to Connect to a Router through 192.168.1.1

According to some users, this IP address is quite resistant to all kinds of threats and dangers coming from the Internet. In general, this private IP address is well spoken of. Even if you experience any problems with it, you can easily find information on how to resolve these issues, since 192.168.1.1 is widely used.

  1. Check the settings of the network, it needs to go to the appropriate section of the Control Panel Windows. In Windows XP, this is the “Network Connections” in Windows 7, and 8 is the “Center Network and Sharing Center.” Find the icon for your network connection, depending on the configuration it can be a “Local Area Connection” or “Wireless Network Connection”. We direct your mouse on it and hit the right button, then go to “Properties” – “TCP / IP v4”. As standard, all the checkboxes are on automatically, you need to set the following parameters: IP: 192.168.1.2. Subnet Mask: 255.255.255.0. Default Gateway: 192.168.1.1. DNS: 192.168.1.1. Gateway: 8.8.8.8. And click “OK”.
  2. Check your Internet browser, for this purpose, “Control Panel”, select the “Network and Internet” and go to “Options”. Then at the bottom of the tab you need to go to “Network Settings” and make sure that the proxy server settings is not checked, otherwise remove it.
    3. Try to go to http://192.168.1.1 with another Internet browser, such as Firefox, Google Chrome, Opera. Perhaps the connection is blocked some of these reviewers.
    4. Reset the router, modem or router, pushing a paper clip to reset button on the rear side of the device.
    5. If all the above steps have not led to a positive result, try disabling Windows Firewall and other various firewalls, antivirus software and firewalls. Disable Firewall can also through the “Control Panel.”

How to Connect to a Router through 192.168.1.1

Knowing the IP address of your router is not always necessary. iPods and PCs usually manage to find the router when they need to go online, and most users don’t have to know the IP address. However, if you want to set up a new router, or you are trying to resolve some problems with a home network, you have to know the IP address.

If 192.168.1.1 is your router’s default, you can open your web browser and point it to http://192.168.1.1. Log into the administrator console and go to configuration screen.

 

 

Если войти на 192.168.1.1 на 192.168.0.1 не получается, On a computer that is running Windows, you receive the following error message: “Страница недоступна”, “DNS server is not responding”

When this issue occurs, you cannot connect to Internet.

 

192.168.1.1 is a private Internet Protocol address, used by various hardware manufacturers as the default. This IP address is part of factory settings, but it can be changed, depending on a user’s preferences.

The default IP address can be easily changed through a router panel.

192.168.1.1 – Default IP address

 

 

If all else fails and you still can not connect to the settings most likely a hardware problem, contact the person or the technical support of your ISP.
Sometimes the connection to 192.168.1.1 is successful, but the settings will not allow due to incorrect login or password. In this case, also suitable to the standard reset button through REZET.
Note: For some models, and manufacturers of network devices 192.168.1.1 – standard address to access the web interface. But sometimes, depending on the network configuration, you may need to configure another address – 192.168.0.1. Popular manufacturers of network devices: Zyxel, TP-Link, Cisco, Lyncsys, Upvel, D-Link, Asus, Sagemcom, Netgear use these two addresses in most cases.

 

Method 3: Use the Ipconfig command-line tool

Use the Ipconfig command-line tool. To do this, follow these steps:

  1. Click Start, type command prompt in the Search Programs and files box, right-click Command Prompt, and then click Run as administrator.
  2. At the command prompt, type the following commands. Press Enter after each command.

ipconfig /flushdns

ipconfig /registerdns

ipconfig /release

ipconfig /renew